We’ve explored the best way to protect your electrical contractors from electrical shock hazards, but there’s more to knowing how to protect yourself. Although there are a number of electric hazards that may occur, most of the issues on this list can be addressed. By following some simple safety procedures, you can reduce or avoid most of the problems that occur during electrical hazards.
If you’re an electrical contractor, read the essential safety information below before you get into a project:
- Wear Anti-Static Clothing
- Keep Your Hand Over Your Body During Construction
- Never Perform The Work Unless It Is Rated For Electrical Lighting
- Avoid Ground Fault Current In Areas Designed For Electrical Equipment
Life-threatening electrocution hazards can occur when electrical contractors walk onto open metal structures, as well as when working around low-voltage power lines and wiring.
Proper lighting and security equipment, being in good physical shape and being insured are part of the electrical contractor’s safety kit. They must follow these steps when working in locations where bombs, other dangerous objects or people might be:
Preventing Electro-Sketch Injury
Never take a drawing or sketch out of your journal or notebooks.
Employers who are concerned about hazardous electrical hazards should:
Have employees switch off cell phones and go into separate rooms before getting a close-up view of a working electrical circuit.
Wear protective clothing that meets ASTM (c) and ANSI (c) standards.
Never touch a lightning strike to bare skin.
When a working electrical circuit looks unsafe or the surroundings aren’t safe
The following actions can help keep you and your staff safe during an electrical storm:
While disconnecting cords, NEVER touch them – electrical outlets can touch wires and/or tools or objects you’re not familiar with.
When in the process of disconnecting cords from power equipment, check the equipment’s shut-off switches for any problems.
It’s always best to start with a fresh in-house crew during a power outage, as they are most likely better trained to avoid hazards that may be present in an electrical storm.
Never leave “AC No Tv” off the power cords of the equipment you’re working with. You may need to quickly take the device off or turn it.
With the increased focus on workplace safety, it’s important for those with electrical contracting expertise to stay up-to-date on anything that could potentially pose a threat to the health of their colleagues or clients.
Doors, window frames, ceiling fans, and light fixtures are all potential risks that electrical contracting professionals might face on the job, even when they’re doing work that does not touch electrical equipment.
When working with electrical equipment, it’s important to never put your hand on anything that you are not familiar with. Electrical power tools are frequently used for temporary installations, and moving equipment around isn’t something that can be taken lightly.
Your safety and health have a direct impact on your productivity and performance. How you go about it is a matter of what best serves you. No two industries have their employees going about work as they’d like. This doesn’t mean you have to join an association or run into a union, just be responsible and use your common sense.
Never Never Never, Ever, Ever not work with electricity if you can possibly avoid it. By carefully choosing a training company that will allow you to keep your workplace safe from electricity hazards you’ll find a safe environment to work in.
Electrical lineman tools:
Cable tie ratchet set
Dip socket set (for various brands of cable)
Electrical lineman tools w/lead-free chips, files and pliers for successful joint removal.
Electrical Safety Tricks to Keep Your Equipment Safe From Burners
Sometimes a burning lamp from a faulty plug can have terrible consequences. It can be particularly hard to avoid a fire when working in dry walls as a main stud remains in contact with the wall. The good news is that there are tricks to keep the lighting fixtures you use from being electrocuted.